ESAB L-TEC SVI 450i CV/CC multi-process power supply for welding MIG (short arc, spray arc, cored wire), Stick, TIG, & air carbon arc gouging.
| Make: | ESAB L-TEC |
| Model: | SVI 450i CV/CC |
| Year: | 1995 approx. |
| Part No: | 31960 |
| Weight: | 54kg |
| Dimensions:: | 58.4cm L x 36.2cm W x 39.4cm H |
| Location: | Ilkeston, Derbys |
| Make: | ESAB L-TEC |
| Model: | SVI 450i CV/CC |
| Year: | 1995 approx. |
| Part No: | 31960 |
| Weight: | 54kg |
| Dimensions:: | 58.4cm L x 36.2cm W x 39.4cm H |
| Location: | Ilkeston, Derbys |
This L-TEC SVI 450i CV/CC welding machine is a high-performance Constant Voltage (CV) / Constant Current (CC) 450-ampere industrial inverter power source that’s designed with adjustable output (voltage or current), slope, and inductance.
The unit is provided with necessary cables & a remote control unit.
Exclusive power MOSFET inverter technology combined with solid state electronics provides multi-process welding performance including MIG (short arc, spray arc, cored wire), Stick, TIG, & air carbon arc gouging.
The L-TEC SVI 450i CV/CC offers all this versatility and performance in one compact power source.
This power source is designed to operate in the CV mode for outstanding MIG short arc performance as well as MIG spray-arc & cored wire welding. It is compatible with ESAB’s full line of digital & conventional wire feeders for unmatched accuracy & performance.
The Constant Current (CC) mode for Stick, TIG (scratch-start), & air carbon arc gouging applications is provided by connecting one of the remote-control devices & selecting the CC process mode.
The power source’s electronic output (voltage or current) adjustment provides full-range regulation either locally from the front panel or from a remote control. A convenient panel-mounted digital meter provides selectable output voltage or current readings for welding accuracy.
The panel-mounted 3-step slope selector & variable inductance control allows the operator to select the optimum CV slope/curve characteristic and/or inductance condition required for your MIG welding application.
This ESAB L-TEC unit was bought from new & has been well looked after. It has been used on various construction sites for steel pipework and in our fabrication workshop Ilkeston for various structural steelwork.
It comes in good working order but is missing one of the control knobs on the front, but still works fine. The machine shows various signs of wear and tear which is evident due to it age and usage.
The welder includes the most recent calibration & electrical safety testing certification which was valid until Jan 2022. The welding power source is bought as seen & without any guarantee or warranty.
Please contact us to make an offer or arrange a viewing at our Ilkeston head office.
The ESAB L-TEC SVI 450i cv/cc power source is for 220/380/415 V ac, 3 Phase, 50 Hz service.
| Brand: | ESAB L-TEC |
| Model: | SVI 450i CV/CC |
| Serial No.: | D91A-22211 |
| Part No. (ESAB): | 31960 |
| Part No. L-TEC: | 35617 |
| Rated Output: | 450A @ 38V DC @60% Duty |
| Open Circuit Voltage: | 80V DC (Max. @ 220 v. Input) |
| Input Voltage: | 220/380/415V AC, 3 Phase, 50 Hertz |
| Input Current: @ Rated Load: | 61A @ 220V AC |
| 42A @ 380V AC | |
| 39A @ 415V AC |
You can either use the supplied input power cable (No. 6 AWG, 4/c, type SO, 90° C 12-ft. Ig.), or provide your own leads a per the Input Table below.
Sized per National Electnc Code for 90 C rated copper conductors @ 30 C ambient. Not more than three conductors in raceway or cable. Local codes should be followed if they specify sizes other than those listed above.
For further detailed technical information about this unit please refer to the technical documents attached on the accompanying tab.
The second of two ESAB LHF 250 thyristor-controlled welding rectifier machines designed for welding with coated electrodes, TIG welding & arc air gouging.
A free-standing AHT commercial chest freezer on castors with sliding glass lid, 150cm long x 63cm wide x 87.5cm high with internal volume of 396 litres.
This is the first of two ESAB LHF 250 thyristor-controlled welding rectifier machines designed for welding with coated electrodes, TIG welding & arc air gouging.
Rayden Engineering is a limited company registered in England Reg No. 3190046
© 2025 Rayden Engineering Ltd, All Rights Reserved
